When painting coving & cornice moulding it is vital to not forget that the approach that you desire is based upon the material it is created out of. By way of instance a few coving & cornice materials like extruded polystyrene are extremely absorbent, therefore will be needing a pair of coats of paint to have yourself a wonderful finish. Materials like paper plaster will require less paint but need do a pre-prime firstly .
New Polymer-based polyurethane cornice moldings will probably be given an excellent primer undercoat already implemented in factory, hence cutting back on the cost and time of being forced to try yourself. They only require a top single coat
Traditionally coving is painted white, however, you are able to test out various colours if you should be trying for a more sophisticated appearance. Ordinarily cornice molding is going to soon probably likely be painted a different colour to the wall to make comparison.
It’s advisable that you leave no less than 2-4 hrs after installation before painting your coving , since this allow the glue to place precisely.
When you get coving & cornice molding in hand ,please firstly check your coving& cornice molding is primied in factory or not . As we talk about before ,Polyurethane cornice moldings are usually primied in factory and ready to apply top coat . But if you are using plaster or xps-polystyrene cornice molding , you have to apply a primer .
Now Follow Our 10 Steps To Paint Cornice Moulding & Coving .
- Before you begin painting, It’s wise to resolve any cornice moulding quality issues,like cracks or other surface damage. Use caulk to fill any openings and wait patiently to dry before you paint it over.
- work with a damp cloth to gently wash down and then remove any dirt or dust. That is therefore the primer ensures that a much smoother finish for your own paint and sticks.
- Stick painter’s (masking) tape on the wall just underneath cornice moulding and the ceiling just above to the whole length of the cornice moulding in order to prevent over spill. Painter’s tape is carried by many DIY stores and available. Run your thumb over the tape to make sure the tap firmly on the wall ,then apply prime if required .
- Utilize a moderate sized nylon brush to apply primer, then handling a little section at one time. Try to not wet the brush too much if using paper coated plaster cornice moulding .
- For more elaborate indented cornice patterns make work with of a smaller brush, ensuring you dab on the brush to every carving area. If it is a smooth coving or panel molding ,use a polyester brush to get a better finish .
- Once you’ve finished the primer , make this dry for two hours before painting.
- Paint the molding with same way to apply prime ,using small brush strokes along with utilizing a smaller brush when painting on the borders. This will demand a stable hand, even though using painter’s tape lessens the danger of you getting paint on ceiling or the wall.
- Again allow this coat of paint dry for a minimum of two hours before applying a second coat when demanded.
- Check the Paint Work. You need to wait a another 2 hours, if still yet another coat is needed.If there are some small area look not very good , you can use an appropriate size brush to cover these imperfections
- Add repeat coat of paint till you are satisfied with surface finishing . How many layers of paint needed ,it is decided by cornice moulding materials .Normally cornice moulding should need about 1- 3 coatings of paint to get a great finish